Add a pallet to the runtime

As you saw in Build a local blockchain, the Substrate node template provides a working runtime that includes some default FRAME development modules—pallets—to get you started building a custom blockchain.

This tutorial introduces the basic steps for adding a new pallet to the runtime for the node template. The steps are similar any time you want to add a new FRAME pallet to the runtime. However, each pallet requires specific configuration settings—for example, the specific parameters and types required to perform the functions that the pallet implements. For this tutorial, you'll add the Nicks pallet to the runtime for the node template, so you'll see how to configure the settings that are specific to the Nicks pallet. The Nicks pallet allows blockchain users to pay a deposit to reserve a nickname for an account they control. It implements the following functions:

The set_name function to collect a deposit and set the name of an account if the name is not already taken.
The clear_name function to remove the name associated with an account and return the deposit.
The kill_name function to forcibly remove an account name without returning the deposit.

Note that this tutorial is a stepping stone to more advanced tutorials that illustrate how to add pallets with more complex configuration settings, how to create custom pallets, and how to publish pallets.

Before you begin

Before you begin, verify the following:

You have configured your environment for Substrate development by installing Rust and the Rust toolchain.
You have completed the Build a local blockchain tutorial and have the Substrate node template from the Developer Hub installed locally.
You are generally familiar with software development and using command-line interfaces.
You are generally familiar with blockchains and smart contract platforms.

Tutorial objectives

By completing this tutorial, you will use the Nicks pallet to accomplish the following objectives:

Learn how to update runtime dependencies to include a new pallet.
Learn how to configure a pallet-specific Rust trait.
See changes to the runtime by interacting with the new pallet using the front-end template.

Add the Nicks pallet dependencies

Before you can use a new pallet, you must add some information about it to the configuration file that the compiler uses to build the runtime binary.

For Rust programs, you use the Cargo.toml file to define the configuration settings and dependencies that determine what gets compiled in the resulting binary. Because the Substrate runtime compiles to both a native platform binary that includes standard library Rust functions and a WebAssembly (Wasm) binary that does not include the standard Rust library, the Cargo.toml file controls two important pieces of information:

The pallets to be imported as dependencies for the runtime, including the location and version of the pallets to import.
The features in each pallet that should be enabled when compiling the native Rust binary. By enabling the standard (std) feature set from each pallet, you can compile the runtime to include functions, types, and primitives that would otherwise be missing when you build the WebAssembly binary.

For information about adding dependencies in Cargo.toml files, see Dependencies in the Cargo documentation. For information about enabling and managing features from dependent packages, see Features in the Cargo documentation.

To add the dependencies for the Nicks pallet to the runtime:

Open a terminal shell and change to the root directory for the node template.
Open the runtime/Cargo.toml configuration file in a text editor.
Locate the [dependencies] section and note how other pallets are imported.
Copy an existing pallet dependency description and replace the pallet name with pallet-nicks to make the pallet available to the node template runtime.

For example, add a line similar to the following:
```
pallet-nicks = { version = "4.0.0-dev", default-features = false, git = "https://github.com/paritytech/polkadot-sdk.git", branch = "polkadot-v1.0.0" }
```
This line imports the pallet-nicks crate as a dependency and specifies the following:
- Version to identify which version of the crate you want to import.
- The default behavior for including pallet features when compiling the runtime with the standard Rust libraries.
- Repository location for retrieving the pallet-nicks crate.
- Branch to use for retrieving the crate. Be sure to use the same version and branch information for the Nicks pallet as you see used for the other pallets included in the runtime.
These details should be the same for every pallet in any given version of the node template.
Add the pallet-nicks/std features to the list of features to enable when compiling the runtime.
```
[features]
default = ["std"]
std = [
  ...
  "pallet-aura/std",
  "pallet-balances/std",
  "pallet-nicks/std",
  ...
]
```
This section specifies the default feature set to compile for this runtime is the std features set. When the runtime is compiled using the std feature set, the std features from all of the pallets listed as dependencies are enabled. For more detailed information about how the runtime is compiled as a platform-native binary with the standard Rust library and as a WebAssembly binary using the no_std attribute, see Build process.

If you forget to update the features section in the Cargo.toml file, you might see cannot find function errors when you compile the runtime binary.
Check that the new dependencies resolve correctly by running the following command:
```
cargo check -p node-template-runtime --release
```

Review the configuration for Balances

Every pallet has a Rust trait called Config. The Config trait is used to identify the parameters and types that the pallet needs to carry out its functions.

Most of the pallet-specific code required to add a pallet is implemented using the Config trait. You can review what you to need to implement for any pallet by referring to its Rust documentation or the source code for the pallet. For example, to see what you need to implement for the nicks pallet, you can refer to the Rust documentation for pallet_nicks::Config or the trait definition in the Nicks pallet source code.

For this tutorial, you can see that the Config trait in the nicks pallet declares the following types:

pub trait Config: Config {
    type RuntimeEvent: From<Event<Self>> + IsType<<Self as Config>::RuntimeEvent>;
    type Currency: ReservableCurrency<Self::AccountId>;
    type ReservationFee: Get<<<Self as Config>::Currency as Currency<<Self as Config>::AccountId>>::Balance>;
    type Slashed: OnUnbalanced<<<Self as Config>::Currency as Currency<<Self as Config>::AccountId>>::NegativeImbalance>;
    type ForceOrigin: EnsureOrigin<Self::RuntimeOrigin>;
    type MinLength: Get<u32>;
    type MaxLength: Get<u32>;
}

After you identify the types your pallet requires, you need to add code to the runtime to implement the Config trait. To see how to implement the Config trait for a pallet, let's use the Balances pallet as an example.

To review the Config trait for the Balances pallet:

Open the runtime/src/lib.rs file in a text editor.

Locate the Balances pallet and note that it consists of the following implementation (impl)code block:

pub type Balance = u128;

// ...

/// Existential deposit.
pub const EXISTENTIAL_DEPOSIT: u128 = 500;

impl pallet_balances::Config for Runtime {
  type MaxLocks = ConstU32<50>;
  type MaxReserves = ();
  type ReserveIdentifier = [u8; 8];
  /// The type for recording an account's balance.
  type Balance = Balance;
  /// The ubiquitous event type.
  type RuntimeEvent = RuntimeEvent;
  /// The empty value, (), is used to specify a no-op callback function.
  type DustRemoval = ();
  /// Set the minimum balanced required for an account to exist on-chain
  type ExistentialDeposit = ConstU128<EXISTENTIAL_DEPOSIT>;
  /// The FRAME runtime system is used to track the accounts that hold balances.
  type AccountStore = System;
  /// Weight information is supplied to the Balances pallet by the node template runtime.
  type WeightInfo = pallet_balances::weights::SubstrateWeight<Runtime>;
}

As you can see in this example, the impl pallet_balances::Config block allows you to configure the types and parameters that are specified by the Balances pallet Config trait. For example, this impl block configures the Balances pallet to use the u128 type to track balances.

Implement the configuration for Nicks

Now that you have seen an example of how the Config trait is implemented for the Balances pallet, you're ready to implement the Config trait for the Nicks pallet.

To implement the nicks pallet in your runtime:

Open the runtime/src/lib.rs file in a text editor.
Locate the last line of the Balances code block.

Add the following code block for the Nicks pallet:

impl pallet_nicks::Config for Runtime {
// The Balances pallet implements the ReservableCurrency trait.
// `Balances` is defined in `construct_runtime!` macro.
type Currency = Balances;

// Set ReservationFee to a value.
type ReservationFee = ConstU128<100>;

// No action is taken when deposits are forfeited.
type Slashed = ();

// Configure the FRAME System Root origin as the Nick pallet admin.
// https://paritytech.github.io/substrate/master/frame_system/enum.RawOrigin.html#variant.Root
type ForceOrigin = frame_system::EnsureRoot<AccountId>;

// Set MinLength of nick name to a desired value.
type MinLength = ConstU32<8>;

// Set MaxLength of nick name to a desired value.
type MaxLength = ConstU32<32>;

// The ubiquitous event type.
type RuntimeEvent = RuntimeEvent;
}

Add Nicks to the construct_runtime! macro.

For example:

construct_runtime!(
pub enum Runtime where
   Block = Block,
   NodeBlock = opaque::Block,
   UncheckedExtrinsic = UncheckedExtrinsic
 {
   /* --snip-- */
   Balances: pallet_balances,

   /*** Add This Line ***/
   Nicks: pallet_nicks,
 }
);

Save your changes and close the file.
Check that the new dependencies resolve correctly by running the following command:
```
cargo check -p node-template-runtime --release
```
If there are no errors, you are ready to compile.
Compile the node in release mode by running the following command:
```
cargo build --release
```

Start the blockchain node

After your node compiles, you are ready to start the node that has been enhanced with nickname capabilities from the Nicks pallet and interact with it using the front-end template.

To start the local Substrate node:

Open a terminal shell, if necessary.
Change to the root directory of the Substrate node template.
Start the node in development mode by running the following command:
```
./target/release/node-template --dev
```
In this case, the --dev option specifies that the node runs in developer mode using the predefined development chain specification. By default, this option also deletes all active data—such as keys, the blockchain database, and networking information—when you stop the node by pressing Control-c. Using the --dev option ensures that you have a clean working state any time you stop and restart the node.
Verify your node is up and running successfully by reviewing the output displayed in the terminal.

If the number after finalized is increasing in the console output, your blockchain is producing new blocks and reaching consensus about the state they describe.
Keep the terminal that displays the node output open to continue.

Start the front-end template

Now that you have added a new pallet to your runtime, you can use the Substrate front-end template to interact with the node template and access the Nicks pallet.

To start the front-end template:

Open a new terminal shell on your computer.
In the new terminal, change to the root directory where you installed the front-end template.
Start the web server for the front-end template by running the following command:
```
yarn start
```
Open http://localhost:8000/ in a browser to view the front-end template.

Set a nickname using the Nicks pallet

After you start the front-end template, you can use it to interact with the Nicks pallet you just added to the runtime.

To set a nickname for an account:

Check the account selection list to verify that the Alice account is currently selected.
In the Pallet Interactor component, verify that Extrinsic is selected.
Select nicks from the list of pallets available to call.
Select setName as the function to call from the nicks pallet.
Type a name that is longer than the MinNickLength (8 characters) and no longer than the MaxNickLength (32 characters).
Click Signed to execute the function.
Observe the status of the call change from Ready to InBlock to Finalized and the note the events emitted by the Nicks pallet.

Query information for an account using the Nicks pallet

Next, you can use Query capability to read the value of Alice's nickname from the runtime storage for the Nicks pallet.

To return the information stored for Alice:

In the Pallet Interactor component, select Query as the Interaction Type.
Select nicks from the list of pallets available to query.
Select nameOf as the function to call.
Copy and paste the address for the alice account in the AccountId field, then click Query.

The return type is a tuple that contains two values:
- The hex-encoded nickname for the Alice account 53756273747261746520737570657273746172202d20416c696365. If you convert the hex-encoded value to a string, you'll see the name you specified for the setName function.
- The amount that was reserved from Alice's account to secure the nickname (100).
If you were to query the Nicks pallet for the nameOf for Bob's account, you would see the value None returned because Bob has not invoked the setName function to reserve a nickname.

Explore additional functions

This tutorial illustrates how to add a simple pallet to the runtime and demonstrates how to interact with the new pallet using the predefined front-end template. In this case, you added the nicks pallet to the runtime and called the set_name and nameOf functions using the front-end template. The nicks pallet also provides two additional functions—the clear_name function and the kill_name function—that enable an account owner to remove the reserved name or a root-level user to forcibly remove an account name. You can learn about additional features—such as the use of the Sudo pallet and origin accounts—by exploring how these functions work. However, these features are beyond the intended scope of this tutorial. If you want to explore additional features exposed through the Nicks and Sudo pallets, see Next steps and select Specify the origin for a call.

Next steps

There are several tutorials that can serve as next steps for learning more about Substrate development.

Specify the origin for a call explores calling functions using different originating accounts.
Develop smart contracts guide you through using ink! to build smart contracts.
Use macros in a custom pallet illustrates how you can use macros to create your own pallets.